Home Products Low Voltage Drive：S600 Series High-performance Drives

SG600 11-15kW

MOQ: 100 Pieces

Delivery time: 15 Day

1. Full drive, all-round, high-performance vector universal platform and brand new motor control algorithm. Support synchronous and asynchronous motors 2. High scalability options include PLC cards, 1/0 cards, communication cards, CAN cards, etc., which can simultaneously meet the needs of multiple expansion cards and quickly meet the personalized needs of customers. 3. Support customer secondary development

4. Support multiple mainstream communication methods, standard 485 communication 5. Comprehensive thermal simulation design to ensure the rationality of hardware layout. 6. PCB should be sprayed with three proof paint appropriately to improve product environmental adaptability.

Product Details

solar pump drive model description

The user can learn the specification from the nameplate. SG600 -2K2G- 4T ① ② ③

Mark	Description	Contents
①	Series models	SG320,SG350,old series SG600,new series
②	Drive power	7K5G stand for 7.5kw, submersible pump type 1K5G stands for 1.5kw, submersible pumps type
③	Voltage specification	1: = 80 to 350V DC or 110 to 220V AC input 2: = 230 to 450V DC or 200 to 240V AC input 4: = 350 to 900V DC or 380 to 480V AC input S: 1 phase input T: three phase input

3.5.Solar pump drive technical specification

Recommended MPPT voltage range	230~450VDC for 220VAC/240V pumps with 0.75Kw to 4kw 350~800VDC, for 380VAC pumps with1.5kw to 450kw
Recommended input voltage	310Vmp DC for 220V AC pumps, 540Vmp DC for 380V AC pumps
Motor type	Control for permanent magnet synchronous motor and asynchronous motor pumps
Maximum DC power input	1. 450VDC for 220AC output 2. 800VDC or 900VDC for 380V AC output
Rated output voltage	1 phase, 220V. 3 phase, 220V/380V/440V
Output frequency range	0~400Hz
MPPT efficiency	99%,
Ambient temperature range	-10~+50 C
Solar pump control special performance	MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected, etc
Protection function	Stall protection, phase loss protection, phase short circuit protection , ground to phase short circuit protection , input and output short circuit protection, over-temperature protection, etc
Protection degree	IP20, Air force cooling
Running mode	MPPT or CVT
Altitude	Below 1000m; above 1000m, derated 1% for every additional 100m.
Standard AC input backup circuit	CE, Design based on vector control drive, more specification please refer to vector control drive operation manual

3.6. Models and specification

SN	Models	Rate current (A)	DC input range (VDC)	Output voltage (VAC)	Applicable for pumps (KW)	Recommen ded VOC (VDC)	shape and size
1	SG600-0K7G-2S	4.0A	230 to 450	220 to 240	0.75KW	360 to 400	Fig.A
2	SG600-1K5G-2S	7.5A	230 to 450	220 to 240	1.5KW	360 to 400	Fig.A
3	SG600-2K2G-2S	10A	230 to 450	220 to 240	2.2KW	360 to 400	Fig.A
4	SG600-3K0G-2S	13.5A	230 to 450	220 to 240	3.0KW	360 to 400	Fig.B
5	SG600-4K0G-2S	16A	230 to 450	220 to 240	4.0KW	360 to 400	Fig.B
6	SG600-0K7GB-4T	2.5A	350 to 800	380 to 440	0.75KW	650 to700	Fig.A
7	SG600-1K5GB-4T	3.7A	350 to 800	380 to 440	1.5KW	650 to700	Fig.A
8	SG600-2K2GB-4T	5.0A	350 to 800	380 to 440	2.2KW	650 to700	Fig.A
9	SG600-4K0GB-4T	10A	350 to 800	380 to 440	4.0KW	650 to700	Fig.A
10	SG600-5K5GB-4T	13A	350 to 800	380 to 440	5.5KW	650 to700	Fig.B
11	SG600-7K5GB-4T	17A	350 to 800	380 to440	7.5KW	650 to700	Fig.B
12	SG600-011GB-4T	25A	350 to 800	380 to 440	11KW	650 to700	Fig.C
13	SG600-015GB-4T	33A	350 to 800	380 to 440	15KW	650 to700	Fig.C
14	SG600-018G-4T	38A	350 to 800	380 to 440	18.5KW	650 to700	Fig.C
15	SG600-022G-4T	45A	350 to 800	380 to 440	22KW	650 to700	Fig.C
16	SG600-030G-4T	60A	350 to 800	380 to 440	30KW	650 to700	Fig.C
17	SG600-037G-4T	75A	350 to 800	380 to 440	37KW	650 to700	Fig.C
18	SG600-045G-4T	91A	350 to 800	380 to 440	45KW	650 to700	Fig.C
19	SG600-055G-4T	110A	350 to 800	380 to 440	55KW	650 to700	Fig.C
20	SG600-075G-4T	150A	350 to 800	380 to 440	75KW	650 to700	Fig.C
21	SG600-090G-4T	180A	350 to 800	380 to 440	90KW	650 to700	Fig.C
22	SG600-110G-4T	210A	350 to 800	380 to 440	110KW	650 to700	Fig.C
23	SG600-132G-4T	250A	350 to 800	380 to 440	132KW	650 to700	Fig.C

VFD specifications and models	Dimension ( mm )			Mounting holes size ( mm )		Mountin g holes (mm)	Size	Remark
	W	H	D	W1	H1	￠d	Size	Wiring
1 PHASE 2S 220V
SG600-0K75G-2S	86	187	152	68	176	5.5	S1	down in down out wall mounted
SG600-1K5G-2S
SG600-2K2G-2S
SG600-3K0G-2S	105	265	164	87	252	6	S2	down in down out wall mounted
SG600-4K0G-2S
3 PHASE 4T 380V
SG600-0K75GB-4T	86	187	152	68	176	5.5	S1	down in down out wall mounted
SG600-1K5GB-4T
SG600-2K2GB-4T
SG600-4K0GB-4T
SG600-5K5GB-4T	105	265	164	87	252	6	S2	down in down out wall mounted
SG600-7K5GB-4T
SG600-011GB-4T	150	333	216	100	314	5.5	S3	down in down out wall mounted
SG600-015GB-4T
SG600-018G-4T	180	383	228	120	363	6.5	S4	down in down out wall mounted
SG600-022G-4T
SG600-030G-4T	175	435	265	130	420	6.5	S5	down in down out book type
SG600-037G-4T
SG600-045G-4T	265	670	358	200	645	9	S6	up in down out book type
SG600-055G-4T
SG600-075G-4T
SG600-090G-4T	305	845	358	200	820	11	S7	up in down out book type
SG600-110G-4T
SG600-132G-4T

Specifications
POWER Input	Voltage and frequency	Single phase :220V 50/60Hz; Three phase: 220V 50/60Hz; Three phase 380V 50/60Hz
	Allowed fluctuation range	voltage unbalance rate:<3%; Frequency:±5%; aberration rate: as IEC61800-2 required
	Switching impulse current	Lower than rated current
	Frequency drive efficiency	≥96%
POWER Output	Output voltage	Output under rated condition: 3 phase, 0～input voltage, deviation<5%
	Output frequency range	0～1500Hz
	Output frequency accuracy	Max frequency ±0.5%
	Overload capacity	G type: 150% rated current/1 min, 180% rated current/2s, 200% rated current/0.5s
Power Level	Single phase 220V 50/60Hz	0.75kW - 220kW
	Three phase 220V 50/60Hz	0.75kW - 220kW
	Three phase 380V 50/60Hz	0.75kW - 1,120kW
	Three phase 690V 50/60Hz	0.75kW - 1,250kW
Main Control Performance	Motor type	Three-phase asynchronous motor; Permanent magnet synchronous motor (sine wave)
	Control mode	V/F control, SVC,
	Carrier frequency	1.0～16.0kHz
	Speed control range	SVC : rated load 1:200
	Steady speed	SVC : ≤2% rated synchronized speed
	Starting torque	SVC : 150% rated torque at 0.5Hz
	Torque response	SVC :<20ms
	Frequency accuracy	Digital setting: max frequency×±0.01%; Analog setting: max frequency×±0.2%
	Frequency resolution	Digital setting: 0.01Hz; Analog setting: max frequency×0.05
Basic Functions	Torque control	Torque setting calculation, torque mode speed limit
	DC braking capability	Starting frequency:0.00～50.00Hz; Braking time:0.0～60.0s; Braking current:0.0～150.0% rated
	Torque boost	Automatic torque boost 0.0%～100.0%; Manual torque boost 0.0%～30.0%
	V/F curve	Four modes: linear torque characteristic curve, self-set V/F curve, torque reduction characteristic curve (1.1 to 2.0 power), square V/F curve
	Acceleration/Deceler ation curve	2 modes: linear Acceleration/Deceleration and S curve Acceleration/Deceleration. 4 sets of ACC/DEC, time unit 0.01s selectable, longest time: 650.00s
	Automatic voltage adjustment	When the voltage fluctuates, the output voltage is automatically maintained
	Automatic energy-saving operation	Automatically optimize output voltage according to load in V/F control mode to achieve energy-saving operation
	Rated output voltage	Using the power supply voltage compensation function, the rated voltage of the motor is 100%, which can be set within the range of 50 to 100% (the output cannot exceed the input voltage).
	Automatic current limit	Automatically limit the current during operation to prevent frequent over-current fault trips
	Voltage	While power supply voltage fluctuates, it can auto-keep constant output voltage
	Auto-limit current	Auto-limit the current while running to prevent over current break trouble
	Instant power off	Uninterrupted operation through bus voltage control during instantaneous power loss
	Standard functions	PID control, speed track, power off restart, jump frequency, upper/lower frequency limit control, program operation, multi- speed, RS485, analog output, frequency impulse output
	Frequency setting channels	Keyboard digital setting, Analog voltage/current terminal AI1, Analog voltage/current terminal AI2, Communication given and multi-channel terminal selection, Main and auxiliary channel combination, expansion card, supporting different modes switch.
	Feedback input channel	Voltage/Current Terminal AI1, Voltage/Current Terminal AI12, Communication given, Low-speed pulse input PUL, extension card
	Running command	Operation panel given, external terminal given, communication given, expansion card given
	Input command signal	Start, stop, FWD/REV, JOG, multi-step speed, free stop, reset, ACC/DEC time selection, frequency given channel selection, external fault alarm
	External output signal	1 relay output, 1 collector output, 1 AO output: 0～10V output or 4～20mA output
Protective Functions	Protective function	Overvoltage, under-voltage, current limit, over-current, overload, electric thermal relay, overheat, overvoltage stall, data protection, rapid speed protection, input/output phase failure protection.
Keyboard Display	LED display	Built-in keyboard: single line 5- digital tube display, monitor 1 drive status quantity
	Status monitor	Output frequency, given frequency, output current, input voltage, output voltage, motor speed, PID feedback, PID given value, module temperature etc. monitor parameters
	Error alarm	Over-voltage, under-voltage, over-current, short circuit, phase failure, overload, overheat, overvoltage stall, current limit, or current fault health, historical fault record.
Surroundings	Install place	The altitude is less than 1000 meters, and the derating is more than 1000 meters. The derating is 1% for every 100 meters.
	Temperature and humidity	-10 ～ +50°C, derating can be used above 40 °C, the maximum temperature is 60 °C (no-load operation), 5%~95%RH(no condensation)
	Vibration	5.9m/s2(0.6g)
	Storage temperature	-30～+60℃
	Installation mode	Wall hanging
	Protection degree	IP20
	Cooling method	Forced air cooling